×
Suggest this Article to:
TOP INDEXERS
Public Article
-
verified
Verification of Numerical Modeling of Sandy Slope Soils using Non-Woven Geotextile Reinforced under Strip
ISSN: 2789 - 2239
Publisher: author
Verification of Numerical Modeling of Sandy Slope Soils using Non-Woven Geotextile Reinforced under Strip
Indexed in
Technology and Engineering
ARTICLE-FACTOR
1.3
Article Basics Score: 2
Article Transparency Score: 3
Article Operation Score: 2
Article Articles Score: 3
Article Accessibility Score: 2
SUBMIT PAPER ASK QUESTION
International Category Code (ICC):
ICC-1802
Publisher: Bright Star University, Libya.
International Journal Address (IAA):
IAA.ZONE/2789405022239
eISSN
:
2789 - 2239
VALID
ISSN Validator
Abstract
A mathematical report utilizing limited component investigation (PLAXIS 2D, form 8.2) was completed on both supported and unreinforced non-woven geotextile sand slants to confirm the model experimental outcomes. The numerical model was kept the same size as the test model in the laboratory, the observed and computed results were found to be reasonably consistent, in regard of mathematical and exploratory outcomes, the basic upsides of the non-woven geotextile boundaries for most extreme supporting impacts were laid out. The bearing capacity reduction coefficient (iβ) and X/B. In the current study, the maximum iβ is found at X=5B, and it is evident that the values of iβ increase with increasing edge distance of slope. At X/B ratios of 0, 1, 3, 4, and 5, the experimental and numerical analysis agree very well on the iβ for both scenarios.
